High pressure rollover car washing machine
1.Superior quality soft foam brushes.
2.Fully automatic washing procedures,one button pressing to srart the washing process.
3.One rollover washing or two rollover washing is optional.
Product Overviews
This car wash equipment features high-pressure water system and can clean deep stains to meet different customer requirements. This soft touch car wash machine utilizes soft brushes, which can quickly rotate and move in various directions to remove contaminations on the surface during operation.
Features | Data |
Dimension | L*W*H: 2.4m×3.6m×2.9m |
Rail length: 9m rail distance: 3.2m | |
Assembling Range | L*W*H :10.5m×3.7m×3.1m |
Moving Range | L*W: 10000mm×3700mm |
Voltage | AC 380V 3 Phase 50Hz |
Main Power | 20KW |
Water Supply | DN25mm water flow rate≥80L/min |
Air Pressure | 0.75~0.9Mpa air flow rate≥0.1m3/min |
Ground Flatness | Deviation≤10mm |
Applicable Vehicles | Sedan/jeep/minibus within 10 seats |
Applicable Car Dimension | L*W*H: 5.4m×2.1m×2.1m |
Washing Time | 1 rollover 2 minutes 05 seconds /2 rollover 3 minutes 55 seconds |
Product Description
Product Details
Product Features
1.It is suitable for car besuty maintenance store becauase of its small ground occupation area.
2.It neesd just 3 minutes on average to wash one vechile
3.The top brush,side brushes and wheel brushes to clean the vechile from the top to the bottom so the overall vehicle is completely cleaned.
4.Fully automatic washing process saves labor and time.
Installation Cases
Company Profile:
CBK Workshop:
Enterprise Certification:
Ten Core Technologies:
Technical Strength:
Policy Support:
Application:
FAQ:
1. What is the voltage required for the operation of the CBKWash car washing machine?
Our machine needs 3 phase industry power supply, In China is 380V/50HZ., if should be required different voltage or frequency, we have to customize motors for you and change accordingly fans, low-voltage electrical cables, control units, etc.
2. What preparations do customers need to do before equipment installation?
First of all, you need to ensure that the ground is made of concrete, and the thickness of the concrete is not less than 18CM
Need to prepare 1. 5-3 tons of storage bucket
3. What’s the shipping volume of carwash equipment?
Because of the 7.5 meters rail is longer than 20′Ft container, so our machine need to be shipped by 40′Ft container.